A step forward for non-Abelian quantum computing
Our team is making progress on the path towards “non-Abelian” quantum computing, which promises both fault tolerance and significant resource savings.
Computing with non-Abelian anyons, which are a type of quasiparticle, is sought after as it offers an enticing alternative to some of the biggest challenges in mainstream quantum computing. Estimates vary, but some scientists have calculated that some of the trickiest parts, like T gates and magic states distillation, can take up to 90% of the computer’s resources (when running something such as Shor’s algorithm). The non-abelian approach to quantum computing could mitigate this issue.
In a new paper in collaboration with Harvard and CalTech, our team is one step closer to realizing fault-tolerant non-Abelian quantum computing. This paper is a follow-up to our recent work published in Nature, where we demonstrated control of non-Abelian anyons. This marks a key step toward non-Abelian computing, and we are the only company who has achieved this. Additionally, we are the only company offering commercially-available mid-circuit measurement and feed-forward capabilities, which will be vital as we advance our research in this area.
In this paper, our team prepared the ground state of the “Z3” toric code – meaning this special state of matter was prepared in qutrit (3 states) Hilbert space. Before now, topological order has only been prepared in qubit (2 states) Hilbert spaces. This allowed them to explore the effect of defects in the lattice (for the experts, this was the “parafermion” defect as well as the “charge-conjugation” defect. They then entangled two pairs of charge conjugation defects, making a Bell pair.
All these accomplishments are critical steppingstones towards the non-Abelian anyons of the “S3” toric code, which is the non-Abelian approach that promises both huge resource savings previously discussed because it (unlike most quantum error correction codes) provides a universal gate set. The high-fidelity preparation our team accomplished in this paper suggests that we are very close to achieving a universal topological gate set, which will be an incredible “first” in the quantum computing community.
This work is another feather in our cap in terms of quantum error correction (QEC) research, a field we are leaders in. We recently demonstrated a significant reduction in circuit error rates in collaboration with Microsoft, we performed high fidelity and fault-tolerant teleportation of logical qubits, and we independently demonstrated the first implementation of the Quantum Fourier Transform with error correction. We’ve surpassed the “break-even” point multiple times, recently doing so entangling 4 logical qubits in a non-local code. This latest work in non-Abelian QEC is yet another crucial milestone for the community that we have rigorously passed before anyone else.
This world-class work is enabled by the native flexibility of our Quantum Charge Coupled Device (QCCD) architecture and its best-in-class fidelity. Our world-leading hardware combined with our team of over 500 employees, including 370+ scientists and engineers, means that we have the capacity to efficiently investigate a large variety of error correcting codes and fault-tolerant methods, while supporting our partners to do the same. Fault tolerance is one of the most critical challenges our industry faces, and we are proud to be leading the way towards large scale, fault-tolerant quantum computing.
About Quantinuum
Quantinuum, the world’s largest integrated quantum company, pioneers powerful quantum computers and advanced software solutions. Quantinuum’s technology drives breakthroughs in materials discovery, cybersecurity, and next-gen quantum AI. With over 500 employees, including 370+ scientists and engineers, Quantinuum leads the quantum computing revolution across continents.
At this year’s Q2B Silicon Valley conference from December 10th – 12th in Santa Clara, California, the Quantinuum team will be participating in plenary and case study sessions to showcase our quantum computing technologies.
Schedule a meeting with us at Q2B
Meet our team at Booth #G9 to discover how Quantinuum is charting the path to universal, fully fault-tolerant quantum computing.
Join our sessions:
Tuesday, Dec 10, 10:00 - 10:20am PT
Plenary: Advancements in Fault-Tolerant Quantum Computation: Demonstrations and Results
There is industry-wide consensus on the need for fault-tolerant QPU’s, but demonstrations of these abilities are less common. In this talk, Dr. Hayes will review Quantinuum’s long list of meaningful demonstrations in fault-tolerance, including real-time error correction, a variety of codes from the surface code to exotic qLDPC codes, logical benchmarking, beyond break-even behavior on multiple codes and circuit families.
Wednesday, Dec 11, 4:30 – 4:50pm PT
Keynote: Quantum Tokens: Securing Digital Assets with Quantum Physics
Mitsui’s Deputy General Manager, Quantum Innovation Dept., Corporate Development Div., Koji Naniwada, and Quantinuum’s Head of Cybersecurity, Duncan Jones will deliver a keynote presentation on a case study for quantum in cybersecurity. Together, our organizations demonstrated the first implementation of quantum tokens over a commercial QKD network. Quantum tokens enable three previously incompatible properties: unforgeability guaranteed by physics, fast settlement without centralized validation, and user privacy until redemption. We present results from our successful Tokyo trial using NEC's QKD commercial hardware and discuss potential applications in financial services.
Wednesday, Dec 11, 5:10 – 6:10pm PT
Quantinuum and Mitsui Sponsored Happy Hour
Join the Quantinuum and Mitsui teams in the expo hall for a networking happy hour.
Particle accelerator projects like the Large Hadron Collider (LHC) don’t just smash particles - they also power the invention of some of the world’s most impactful technologies. A favorite example is the world wide web, which was developed for particle physics experiments at CERN.
Tech designed to unlock the mysteries of the universe has brutally exacting requirements – and it is this boundary pushing, plus billion-dollar budgets, that has led to so much innovation.
For example, X-rays are used in accelerators to measure the chemical composition of the accelerator products and to monitor radiation. The understanding developed to create those technologies was then applied to help us build better CT scanners, reducing the x-ray dosage while improving the image quality.
Stories like this are common in accelerator physics, or High Energy Physics (HEP). Scientists and engineers working in HEP have been early adopters and/or key drivers of innovations in advanced cancer treatments (using proton beams), machine learning techniques, robots, new materials, cryogenics, data handling and analysis, and more.
A key strand of HEP research aims to make accelerators simpler and cheaper. A key piece of infrastructure that could be improved is their computing environments.
CERN itself has said: “CERN is one of the most highly demanding computing environments in the research world... From software development, to data processing and storage, networks, support for the LHC and non-LHC experimental programme, automation and controls, as well as services for the accelerator complex and for the whole laboratory and its users, computing is at the heart of CERN’s infrastructure.”
With annual data generated by accelerators in excess of exabytes (a billion gigabytes), tens of millions of lines of code written to support the experiments, and incredibly demanding hardware requirements, it’s no surprise that the HEP community is interested in quantum computing, which offers real solutions to some of their hardest problems.
As the authors of this paper stated: “[Quantum Computing] encompasses several defining characteristics that are of particular interest to experimental HEP: the potential for quantum speed-up in processing time, sensitivity to sources of correlations in data, and increased expressivity of quantum systems... Experiments running on high-luminosity accelerators need faster algorithms; identification and reconstruction algorithms need to capture correlations in signals; simulation and inference tools need to express and calculate functions that are classically intractable.”
The HEP community’s interest in quantum computing is growing. In recent years, their scientists have been looking carefully at how quantum computing could help them, publishing a number of papers discussing the challenges and requirements for quantum technology to make a dent (here’s one example, and here’s the arXiv version).
In the past few months, what was previously theoretical is becoming a reality. Several groups published results using quantum machines to tackle something called “Lattice Gauge Theory”, which is a type of math used to describe a broad range of phenomena in HEP (and beyond). Two papers came from academic groups using quantum simulators, one using trapped ions and one using neutral atoms. Another group, including scientists from Google, tackled Lattice Gauge Theory using a superconducting quantum computer. Taken together, these papers indicate a growing interest in using quantum computing for High Energy Physics, beyond simple one-dimensional systems which are more easily accessible with classical methods such as tensor networks.
We have been working with DESY, one of the world’s leading accelerator centers, to help make quantum computing useful for their work. DESY, short for Deutsches Elektronen-Synchrotron, is a national research center that operates, develops, and constructs particle accelerators, and is part of the worldwide computer network used to store and analyze the enormous flood of data that is produced by the LHC in Geneva.
Our first publication from this partnership describes a quantum machine learning technique for untangling data from the LHC, finding that in some cases the quantum approach was indeed superior to the classical approach. More recently, we used Quantinuum System Model H1 to tackle Lattice Gauge Theory (LGT), as it’s a favorite contender for quantum advantage in HEP.
Lattice Gauge Theories are one approach to solving what are more broadly referred to as “quantum many-body problems”. Quantum many-body problems lie at the border of our knowledge in many different fields, such as the electronic structure problem which impacts chemistry and pharmaceuticals, or the quest for understanding and engineering new material properties such as light harvesting materials; to basic research such as high energy physics, which aims to understand the fundamental constituents of the universe, or condensed matter physics where our understanding of things like high-temperature superconductivity is still incomplete.
The difficulty in solving problems like this – analytically or computationally – is that the problem complexity grows exponentially with the size of the system. For example, there are 36 possible configurations of two six-faced dice (1 and 1 or 1 and 2 or 1and 3... etc), while for ten dice there are more than sixty million configurations.
Quantum computing may be very well-suited to tackling problems like this, due to a quantum processor’s similar information density scaling – with the addition of a single qubit to a QPU, the information the system contains doubles. Our 56-qubit System Model H2, for example, can hold quantum states that require 128*(2^56) bits worth of information to describe (with double-precision numbers) on a classical supercomputer, which is more information than the biggest supercomputer in the world can hold in memory.
The joint team made significant progress in approaching the Lattice Gauge Theory corresponding to Quantum Electrodynamics, the theory of light and matter. For the first time, they were able study the full wavefunction of a two-dimensional confining system with gauge fields and dynamical matter fields on a quantum processor. They were also able to visualize the confining string and the string-breaking phenomenon at the level of the wavefunction, across a range of interaction strengths.
The team approached the problem starting with the definition of the Hamiltonian using the InQuanto software package, and utilized the reusable protocols of InQuanto to compute both projective measurements and expectation values. InQuanto allowed the easy integration of measurement reduction techniques and scalable error mitigation techniques. Moreover, the emulator and hardware experiments were orchestrated by the Nexus online platform.
In one section of the study, a circuit with 24 qubits and more than 250 two-qubit gates was reduced to a smaller width of 15 qubits thanks our unique qubit re-use and mid-circuit measurement automatic compilation implemented in TKET.
This work paves the way towards using quantum computers to study lattice gauge theories in higher dimensions, with the goal of one day simulating the full three-dimensional Quantum Chromodynamics theory underlying the nuclear sector of the Standard Model of particle physics. Being able to simulate full 3D quantum chromodynamics will undoubtedly unlock many of Nature’s mysteries, from the Big Bang to the interior of neutron stars, and is likely to lead to applications we haven’t yet dreamed of.